Just arrived! This designer panel is by Ky Fujita for QH Textiles, taking hanafukin panels in a new direction, while staying traditional. This is the QH version of the square grid 'just dots' hitomezashi (one stitch) sashiko fabrics, so you can stitch your own choice of hitomezashi designs on the same beautiful cotton/linen blend used for their other panels. A matching isometric (triangular grid) is also available). Please see my stitching suggestions below for ways to use these panels to best advantage. Hand printed in Japan.
It is a 'hana fukin' with literally means 'flower cloth' and printed on greige (unbleached natural) fabric, 85% cotton, 15% linen. Each panel is supplied in one piece with a plain area the same size attached, because they are designed to be stitched through both layers and the edges turned in to make a little cloth, but you can stitch the printed layer separately (as I often do). They may be stitched with a doubled or single thread (or a mixture of both, for an interesting effect), in coloured threads, or white for a very minimalist contemporary look. Any of my medium sashiko threads would be ideal for these panels.
Stitching suggestions for the panel -
There are many hitomezashi designs in The Ultimate Sashiko Sourcebook, and I also stock several different Japanese language books which feature a lot of hitomezashi patterns. The 'dots' on this panel alternate with small crosses, which makes it a little easier to know where you are on the grid.
These hand printed designer panels are more expensive than the other hanafukin I sell, but the fabric is so beautiful, I wanted to start selling them! I have more more designs by Ky Fujita in stock, including many pictorial panels.
Sashiko Cloth by QH Textiles (Australia)
Printed with water-soluble ink - marks wash out
Composition : 85% Cotton, 15% linen
Individual Cloth Size : Approx. 30cm x 60cm (Finished size : 30cm x 30cm)
This unbleached QH greige fabric is a slightly finer weave than the Olympus hanafukin sarashi cotton, although the stitch length is about 3mm (the same as my Olympus panels).
#KF2020-18 'Grid 1' designer hanafukin sashiko sampler
Hanafukin cloths are traditionally stitched through two layers of fabric (the second layer is the plain section) but can be stitched just through one if you want to add wadding and quilt the panel after finishing the sashiko stitching. For 'quilt as you go', the plain section can be used as a backing.
To stitch through two layers, the cloth can be stitched all round and bagged out before stitching the sashiko; stitched across the short ends with right sides together, then the sashiko stitched, and finally the two selvedges turned in on each other and ladder stitched together; or the edges tucked in using a butted finished and stitched all round. Any of these can also be done after the sashiko is stitched, if you don't want the back of your stitching to be visible.
In addition to simply stitching the whole panel in medium white sashiko thread, you can experiment with different colours and thread thicknesses. It would look great with the circle outlines stitched in one or more colours. Of course, if you are including this panel with others in a quilt or wallhanging, you could take your colour inspirations from the other panels. Whatever colours you choose, remember the lightest colours, white especially, will appear bolder against the dark blue fabric, while colours like deep red will recede, rather than create a bright accent in your stitching.The whole panel can be stitched in a single medium sashiko thread or with some threads doubled for a bolder effect, such as the circle outlines. If you wish to stitch in just one colour, try combining the 20m medium sashiko thread with the 80m fine sashiko thread.
